LeoR Universal Underwater housing
We’re official suppliers for
The LeoR is the most technological universal underwater housing in the world. To date, no other solution exists which concentrates, in a single housing, USB, Wi-Fi, I.R. and Bluetooth technologies. A condensation of Easydive experience and of the collaboration with the best professionals of our sector.
Customization and extra charge. When needed, you can equip the LeoR with 2 large batteries, that way you power the mirrorless which require extra charge.
You visualize camera data on the display and customize the functions from the menu of the housing. For example, you can power off the video output or the power from housing to the camera, or set the time for the backlight of the keypad.
The LeoR housing is guaranteed for life
Main characteristics:
- Integrated OLED display
- Keypad with backlighting*
- Predisposed for the installation of various accessories*: Vacuum System, Fiber Optic Trigger for Flash, Bulkhead Nikonos for Flash
- Possibility of installing an external monitor and connecting a video output cable to the surface* via an HDMI - SDI 3G converter
- The new power supply system allows the use of two battery packs* to power the housing, the camera and the accessories
- Dedicated app, Android and iOS, to configure and personalize the LeoR.
Use the Configurator to discover all the available options and learn the final price.
Portholes and other accessories are purchased separately. The images are purely demonstrative.
*Optional which can be implemented with the Configurator.
Compatible with:
- Pocket Cinema cameras by Black Magic
- Mirrorless and DSLR cameras
Book a free video call
General characteristics:
⦁ Travel Friendly. The LeoR, made from a block full of Anticorodal Aluminium, is super light: in water it only weighs 150 gr, about 500 gr less compared to Leo3. The dimensions do not change.
⦁ Robust. Despite being lighter, its functionality is still guaranteed down to -150 m, with Easydive lifetime guaranteed.
⦁ Technological. For over 25 years we design and manufacture electronic controls for underwater housings. LeoR is a concentration of this experience. In addition to technologies already included in Leo housings — USB, I.R, Wi-Fi — there’s also Bluetooth control. Easily access housing menus and the replicas of your camera’s parameters with the OLED display integrated in the housing. The illumination sensor automatically adjusts OLED display luminosity and LED indicators, and disables the backlight of the keyboard when there’s too much light.
⦁ Charge. If you need more power, you can equip the LeoR with two packs of Li-Ion 14.8 V 3000 mAh batteries. The internal power supply card supplies the camera and the accessories. You use a single battery to supply all the accessories: Trigger, Vacuum System, backlit keyboard and HDMI-SDI converter. If your camera doesn’t have the option of USB charging, you can supply it with a compatible false battery.
⦁ Illuminated. We know how important it is to have light when you need it. That’s why we provided an Optional to illuminate the keypad: at nighttime or in low visibility conditions, you’ll only need to press a button. When you do maintenance, you can also disassemble everything without worrying about doing damage: the lighting system is watertight, wireless power. With the LeoR app you also set the duration of the backlight.
⦁ Record. The HDMI-SDI3G converter has 2 SDI video outputs: one for the external monitor, the other for sending a video signal to the surface.
⦁ Controlled. With electronic control instead of a mechanical one you manage the settings quickly and easily. You only need to press a button on the electronic keypad to execute commands which require complex activation of mechanical buttons, or to access the camera menu via touch screen. In our software for Blackmagic we have provided, for example, a single button to change both video resolution and FPS.
⦁ Ergonomic. Thanks to the ergonomic handle, your hand never leaves the housing and you access all the main functions thanks to wet-contact magnetic buttons which are well placed on the handle: two trigger ones on the front and nine on the rear. Besides, with the switch button you can increase the available controls.
⦁ Predisposed. LeoR is predisposed for everything. On the front it has:
- 8 m5 holes (4 for removable supporting feet)
- 1 1/4’’ hole
- 1 3/8” central hole for any trestle
- 2 M8 holes to be able to fix a rod for a second handle.
Next to the display there are 6 m4 holes in which it is possible to fix a hood or other accessories. In the upper part there are 5 M14x1 caps where it is possible to implement 2 connectors SDI video output, Vacuum System and other possible solutions.
⦁ Connected. With the LeoR app you manage easily all the available functions:
1. insert the pairing PIN for Blackmagic on the phone
2. customize the function of keypad buttons
3. update the housing software and add new cameras
4. adjust housing parameters such as the backlight on time, on-off trigger, on-off converter, auxiliary camera power supply, etc.
Download the compatibility file from the list of standard functions. If you need to add functions, contact us, we’ll be happy to help you.
*Lifetime guarantee is dependent upon a yearly maintenance done by Easydive.
ideal for (i.e. for you, if):
- you want a product 100% customized for you
- you want to protect your equipment without risk
- you want a quality product that lasts for ever
- you have several cameras and want to use them without changing housing
- you want a super-technological housing
- you want to rely on solid customer care
- you need consultation to know how to best configure the equipment
not for you, if
- you’re looking for a cheap product to throw away after a few uses
- you don’t want to invest in your cameras’ security
- you’re not interested in documenting your immersions
-
Is the LeoR really a universal housing? Does it work with cameras from different brands?
Yes. No mechanical buttons on the controls: the LeoR communicates electronically with the camera, via USB, Wi-Fi, Bluetooth or infrared, with patented Easydive technology.
It's compatible with Canon, Nikon, Sony, Panasonic, Hasselblad, Blackmagic, Leica and other supported models. Each camera has its own dedicated centering base, independent of the physical position of the buttons.
Change camera body, change base. The housing stays the same. -
If I buy a LeoR today, will I be able to use it with the professional cameras of the coming years?
In most cases, yes. The LeoR’s electronics are upgradable: for a new camera, a software update and a new centering base are usually enough. Before confirming compatibility, our technical department checks the size and electronics of the new camera.
The goal is for you to keep the same housing for many years, even when you change camera.
-
Can I control all my camera's functions with the LeoR?
Yes, you can control the main functions for underwater photo and video. The management is electronic, not mechanical: the same keypad adapts to different cameras. Functions vary slightly from model to model, depending on the manufacturer's protocol.
For shooting you can choose between three modes: pressure shutter, release shutter, and photogrammetry mode, the latter developed together with technical divers for photogrammetric surveys and documentation of archaeological sites. -
Can I trust the electronic controls? Is there any shutter delay?
Yes, you can. It's a technology we've been developing since 2006, now proven over thousands of dives. Modern cameras, after all, are already fully electronic: we rely on software for autofocus, exposure and stabilization. The LeoR applies the same logic to the housing.
No delay: the LeoR emulates the camera's original remote control, with the same immediate response intended by the manufacturer.
The boards are protected against humidity with a specific treatment and installed in a protected internal position. On top of that, a dual water alarm, audible and visual, immediately signals any water ingress. -
If I change camera, do I need to buy a new LeoR?
No. You change camera, not housing. We adapt the centering base, connections and, if needed, the software to the new compatible camera: the base centers the sensor relative to the lens and port, the LeoR stays the same. And with a single housing you keep using both cameras.
This is the Forever principle: an aluminum housing, repairable and upgradable, that follows you over time instead of being replaced with every gear change. -
How much power does the LeoR use? Can I use it for multiple dives without recharging?
Yes, you can. The internal 14.8 V – 3 Ah battery guarantees over 14 hours of autonomy and can also power the camera body, reducing drain on the camera's own battery. With the optional dual battery configuration you can handle up to three consecutive dives without opening the housing, depending on the camera and settings used. Fewer openings, fewer battery changes, more safety underwater.
-
Can I install a trigger, vacuum system or external monitor on the LeoR?
Yes, the LeoR is built exactly for this. During assembly we configure the LeoR around how you work: strobe connectors, fiber optic trigger, vacuum system, backlit keypad, video output, internal SSD or an internally mounted HDMI-SDI converter. This isn't a fixed-configuration housing: we build it around your way of shooting photo or video underwater.
Tell us your setup: we'll tell you what to integrate -
What's the difference between LeoR and Leo3WI? Which one should I choose?
It depends on the camera you use. The Leo3WI is designed for compact mirrorless cameras, like many Sony Alpha models: it has a 90 mm internal bayonet, which is the diameter available for the lens. The LeoR is more spacious, with a 106 mm bayonet: 16 mm more, which makes the difference with larger lenses. LeoR is the right choice for camera bodies like the Canon EOS R5, Blackmagic or Panasonic S1.
Do you have a large camera and a compact one? With the LeoR you use both, just changing the base.Write to us with your camera and lenses: we'll tell you which housing is right for you
-
Can I buy an Easydive housing through a retailer?
No. Easydive sells directly, without intermediaries, from the very start. A universal housing needs to be configured around your camera, lenses and way of working: that's why we talk to you directly, before and after the purchase.
Got a question? Write to us, you'll talk to the people who design, build and repair your housing, by email, WhatsApp or video call. -
Does Easydive ship the LeoR worldwide? How long does it take?
Yes, we ship from Cervia to over 75 countries. From order to finished housing, allow around 2-3 weeks for assembly and configuration. Then choose your shipping: Express (1-2 days) or Economy (up to 5-6 days), indicative times that vary by destination. Customs and export documentation: we take care of that.
Shipping details -
How does LeoR maintenance work?
We notify you when it’s due, by email and WhatsApp, wherever you are. Maintenance includes: o-ring replacement, checks on buttons and wiring, software update, new pressure test.
To arrange shipping of your equipment, contact us and download the MAINTENANCE FORM at the bottom of the Warranty and Service section. On request, we can also arrange pickup and delivery of the housing. -
Is the LeoR covered by a lifetime warranty?
Yes, if maintenance is kept up to date. The warranty covers manufacturing or assembly defects, not impacts or improper use. After each maintenance, the coverage is renewed, according to Easydive’s terms. Full details are in the Warranty and Service section.







- Extensions
- Underwater Led Lamps
- Underwater Strobes
- Plexiglass Ports
- Crystal Glass Ports
- Port Rings
- Recommended Accessories
- Accessories for Underwater Strobes
- Viewfinders
- External Monitors
- Batteries and Cables
- Bagpacks and Cases
- Brackets and Straps
- Additional Lenses and Filters
- Arm Kits
- Trays
- Balls and Mounts
- Handles and Grips
- Tripods
- Port Spare Parts
- Covers and Taps
- Accessories Spare Parts

Underwater Housing





Underwater Lighting




Accessories
Plexiglass Ports
Crystal Glass Ports
Extensions
Port Rings
Covers and Taps
Port Spare Parts
Recommended Accessories
Batteries and Cables
Viewfinders
Additional Lenses and Filters
Remote Control
Brackets and Straps
Accessories Spare Parts
External Monitors
Clothing and Gadgets
Arm Kits
Arms
Floats
Clamps
Balls and Mounts
Trays
Handles and Grips
Polecams
Tripods
Arms and Mounts Spare Parts
Helmets

