CB11000 lumen video light
We’re official suppliers for
An 11,000-lumen video light with a 120° beam and 5000 K light. It has built-in blue LEDs for fluorodiving and red LEDs for focusing without dazzling your subject.
It’s waterproof to 100 metres and runs on a rechargeable 4×21700 battery pack. You can add a remote controller (sold separately) and operate the light without taking your hands off the housing.
The light has three output levels: 2,750, 5,500 and 11,000 lumens. At 120°, the beam is wide and covers the frame of wide-angle footage well. The colour temperature is 5000 K, with a colour rendering index of Ra 85. Tones stay natural, on skin and on the colours of the seabed alike.
The same head houses 8 blue LEDs with three levels (55, 110 and 220 lumens), designed for fluorodiving. The yellow filter is in the box. Put it in front of your lens or mask and the fluorescence becomes sharp. The 6 red LEDs, at 500 lumens, help you focus when you approach subjects you don’t want to dazzle.
Burn time depends on output. You get up to 6 hours at the lowest level, 3 hours at medium and 1.5 hours at full power. The battery pack is a BATCELL21700×4 lithium-ion. The button has a built-in colour charge indicator: blue, green, red, and flashing red when it’s time to surface or recharge. There’s also an SOS function.
The body is anti-corrosion anodised aluminium with tempered front glass. The light is tested to 100 metres and weighs 679 g out of the water and 283 g underwater. The ball is included and mounts directly onto your arms. The ERM mount lets you release it and clip it back on in seconds.
It attaches to Carbonarm systems via the lower ball.
Warranty: this light is made by the French company BigBlue, and Easydive is a reseller. It is covered by the standard legal warranty, but NOT by our Lifetime Warranty, which applies only to Carbonarm and Easydive branded products.
Support: technical support is provided by the French manufacturer BigBlue.
Key features:
LED type and light output
- COB LED for white light, 6 red XPE LEDs and 8 blue XPE LEDs.
- White light on three levels:
Level I: 2,750 lumens
Level II: 5,500 lumens
Level III: 11,000 lumens - Red light: 500 lumens, for focusing without dazzling your subject.
- Blue light on three levels, 55, 110 and 220 lumens, for fluorodiving.
Burn time and battery
- Rechargeable Li-ion battery pack BATCELL21700×4.
- Burn time: 6 hours at level I, 3 hours at level II and 1.5 hours at level III.
Durability and maintenance
- LEDs rated for up to 50,000 hours of use.
- Rinse in fresh water after every dive.
- If you won’t use the light for more than a month, remove the battery.
Controls and modes
- One button for everything: three white light levels, three blue light levels, one red light level and the SOS function.
- Charge indicator on the button: blue, green, red, flashing red.
- Optional remote controller, to operate the light from the housing without taking your hands off the handles (sold separately).
Construction and materials
- Anti-corrosion anodised aluminium body.
- Tempered front glass.
- Depth tested to 100 m.
- Size: diameter 63 mm × length 140.6 mm.
- Weight in air: 679 g (battery included). Buoyancy in water: -283 g.
- Wide beam: 120°.
- Colour temperature: 5000 K (natural white light).

Underwater Housing





Underwater Lighting




Accessories
Plexiglass Ports
Crystal Glass Ports
Extensions
Port Rings
Covers and Taps
Port Spare Parts
Recommended Accessories
Batteries and Cables
Viewfinders
Additional Lenses and Filters
Remote Control
Brackets and Straps
Accessories Spare Parts
External Monitors
Clothing and Gadgets
Arm Kits
Arms
Floats
Clamps
Balls and Mounts
Trays
Handles and Grips
Polecams
Tripods
Arms and Mounts Spare Parts
Helmets

